Horizontal Multistage Magnetic Driven Pump

• Customization: Available
• Max.Head: >150m
• Max.Capacity: >400 L/min
• Model NO.: MZF-D serial
• Impeller Number: Multistage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Flow(Capacity): 0~600³/H
• Head: 0~800m
• Temperature: -50~ 450degrees Celsius
• Pressure: 2.5~10MPa
• Power: ~280kw
• Transport Package: Woodencase
• Trademark: Dalian Kehuan Pump Co., Ltd
• Origin: Dalian, Liaoning, China
• HS Code: 8413709990
• Production Capacity: 600 PC/Year

Product Description

Product introduction
Horizontal Multistage Magnetic Driven Pump
Multistage, single suction, between-bearings.
Foot-mounted structure or Centerline-supported structure.
The pump and motor are separated with standard normal motor, so the pump can be changed parts at site and needs not be returned factory.
The pump hydraulic model is from Europe with high efficiency. Two sets of hydraulic model is equipped at same outlet port. The flow range at BEP best efficiency point is wide.
Leakage-free is realized by static sealing gasket for all the sealing points and magnetic coupling driven. The nitrogen sealing is also not used, so the operation of pump is safe, economic and reliable.
The modular theory design makes compact structure, parts generalization and easy maintenance.
The magnet material is made of special rare earth alloy with demagnetizing temperature up to 450 Degrees Celsius through special technology. So the pumps are guaranteed 15 years of operation life;
The slide bearing material is high purity of 99% silicon carbide, and all the friction couples of bearing are high quality silicon carbide.
The pump standard confirms to API 610, API 685 etc.

Material:
Carbonsteel; chromed steel; austeniticstainlesssteel; duplexsteel; Titanium and Titanium Alloys; Hastelloy C-276 and other special materials; It depends the customer's request

PARTS NAME	S-6	A-8	D-1	TITANIUM	HAST C276
Casing	Cast steel	316 AUS	DUPLEX	Ti	HAST C
Impeller	12%CR	316 AUS	DUPLEX	Ti	HAST C
Containment shell	Hastelloy C276	Hastelloy C276	Hastelloy C276	Hastelloy C276	Hastelloy C276
Inner magnet rotor	304/SM2C017	316/	316/ SM2C017	Ti /SM2C017	HAST C/ SM2C017
Pump shaft	12%CR	316 AUS	2205	Ti	HAST C
Slide bearing	304/SSIC	316/SSIC	316/SSIC	Ti/SSIC	HAST C/SSIC

Containment shell
The containment shell is made fromHastelloy c-276formed by special technology without axial welding seam. So it ensures the sealing and chemical stability for containment shell.
The double layer of containment shell functions reliable double protection. It will be alarmed when the first layer of containment shell is leaked while the medium is still completely sealed without any leakage.
Slide bearing
The material of slide bearing is made from 97.5% purity rate of silicon carbide (SSIC),The working life of the wear resisting and high strength material is 10 times of normal silicon carbide baring and carbon bearing.
Ball bearing
The ball bearing is NSK or SKF bearings.
Lubrication: Grease or Oil, It depends the customer's request
Magnetic material
The magnet material of Kehuan magnetic pump is permanent-magnet alloy with unidirectional temperature up to 450^oc. It is a medium to pass on the moment of torsion in magnetic driven pump. It guaranteed a wide operating range and is highly resistant against demagnetization.

company profile
   Established in 2002, Dalian Kehuan Pump Co.,Ltd. is leading manufacturer on pump design and manufacture that meet the most exacting quality requirements. The original intention of the general manager is to believe that technology and environmental protection are the major trends and future themes. We advocate: Enjoy technology and protect the environment. This is also the origin of the company name.
   The reasons why we did not choose a canned motor pump and chose a magnetic pump mainly consider several aspects:
1. The magnetic pump has a flexible structure and has good interchangeability with ordinary centrifugal pumps.
2. Convenient inspection and maintenance, low maintenance cost, and energy saving than canned motor pump.
3. At present, domestic magnetic pumps cannot be used as large pumps. Foreign magnetic pumps account for much higher proportions than canned motor pumps, so we need to reinforce them.

   First, there are a lot of South magnet pumps manufacture focus on PVDF magnetic pumps and low-standard metal magnetic pumps (design standards JB/T 7742 and HG/T 2730) .They are limited by their own capabilities and cannot cope with many working conditions.
   Second: Some joint ventures have not fully engaged in the development of magnetic pump. For example, H company, which has been in the Chinese market for many years, mainly promotes canned motor pumps in order to cater to the preferences of the Chinese market. The magnetic pump, which should have been vigorously developed, has not been updated for decades. Their magnetic pumps can only be used in simple working conditions which is less than 132kw.
   Kehuan pump must make a comprehensive breakthrough in the status quo of magnetic pumps (such as High power, High temperature, Mud, Easy vaporization, High melting point, etc.)
  Design framework: We use European advanced hydraulic model;
  Design standards according to American petroleum institute standard API685.
  High standard material application: Permanent magnet (Sm2Co17, Temp. -196~450ºC), Sliding bearing (SSIC), Containment shell(HC-276), Rolling bearing (SKF/NSK), Coupling (Wuxi Chuang ming) /German KTR), Electric motor (Nan yang/Jiamusi).
We are well-known in domestic market because of our High quality products and reliable quality assurance system, high efficiency performance and excellent solutions.
   We also have long-term and stable cooperation with foreign customers. Like European, Russia, Chile, India and so on.

*If you have any questions about our products,I hope you can contect me at your convenience.
  Thank you for your concern.