Product introduction
API610 OH1 (Foot mount pump)
}Single-stage horizontal, radially split volute casing pumps with feet below and single-entry radial impeller
}Single-stage horizontal, radially split volute casing pumps with feet below and single-entry radial impeller, end suction branch, radially upwards discharge branch.
}Depending on operating conditions hydraulic balance provided by front or rear wear rings and balance holes. Casing cover with cooling or heating connections , shaft sealing by packings or mechanical seals of any design (single or double seal design ), connections for cooling, flushing or sealing liquid.
}Standardize pipework according to API plans
}Flange possible according to GB, DIN, or ANSI
}Size: 1-16 inches
}Capacity: 0-2600 m3/h
}Head: 0-240m
}Temperature: -80-300 °C
Material:
Carbonsteel; chromed steel; austenitic stainless steel; duplex steel; Titanium and Titanium Alloys; Hastelloy C-276 and other special materials; It depends the customer's request
| |
S-5 |
S-6 |
C-6 |
S-8 |
A-7 |
A-8 |
D-1 |
D-2 |
| Casing |
Cast steel |
Cast steel |
CA15/CA6NM |
Cast steel |
AUST SS |
316 AUS |
DUPLEX |
SUPER DUPLEX |
| Impeller |
Cast steel |
12%CR |
CA15/CA6NM |
316 AUS |
AUST SS |
316 AUS |
DUPLEX |
SUPER DUPLEX |
| Shaft |
AISI4140 |
AISI4140 |
SS420 |
316N |
AUST SS |
316N |
2205 |
2507 |
| Wear rings |
12%CR |
12%CR |
12%CR |
316 Hard faced |
AUST SSHard faced |
316 Hard faced |
Duplex Hard faced |
SUPER Duplex
Hard faced |
| Bearing Frame |
Cast steel |
Cast steel |
Cast steel |
Cast steel |
Cast steel |
Cast steel |
Cast steel |
Cast steel |
Suitable for pumping clean or polluted, cold or hot, chemically neutral or corrosive liquids.
Apply for refineries, petrochemical industry, coal processing, fertilizer, power auxiliary circulation, heating and air-conditioning, zone heat supply, paper and pulp, water & wastewater, general industry.
Foot-mounted,single-stage ,overhung,horizontal
For pumping clean and slightly polluted,cold or hot .chemically neutral or aggressive liquids
In refineries, petrochemical industry, coal processing and cryogenic engineering
In chemical, fibre and general processing industries,particularly in paper and general processing industries,particular in paper and pulp industries and sugar industry
In water industry,particular sea water desalination plants
In heating and air conditioning plants and condensate recovery
In auxiliary circuits of power stations
In environmental protection engineering
In ship and offshore industries.
Company profile
Kehuan pump Co. Ltd. has constantly studying and mastering the skills of advanced technology of zero leakage pumps since 2002. Combining self-innovation with research and development over years, we have been continuously applied new designs,materials and technologies for our star product- the liquid chlorine pumps. Of the great extent, we have been highly fulfilled customers' demand for the high quality, high performance, energy saving and environmental protection, etc.
Quality is the life of the company. Over the years Dalian Kehuan Pumps had been continuously improving and perfecting Quality Management system. In 2002 ISO 9001:2000 Quality management system certification was obtained. In 2008 ISO 9001:2008 Quality management system certification was obtained. In 2018 ISO 9001:2015 Quality management system certification was obtained.
Regarding testing equipment, apart of advanced and powerful testing bench,there are more than 30 sets of testing equipment , including Dynamic balancing machine, electric pressure testing pump etc. to perform hydrotest, physical and chemical test,measurement control, dynamic balance test etc. to ensure that our customers get reliable and efficient pumps.
We are well-known in domestic market because of our High quality products and reliable quality assurance system, high efficiency performance and excellent solutions If pumps and rotating equipment are critical to your operations, you seek specific qualities when selecting external service support:We are-A service partner you can trust-Reliability-Responsiveness-rapid turn around-Innovative solutions
Manufacturing Capacity
We have professional casting workshops and several outsourcing machining sub-contractors. All the casting parts are casted with plastic mould and metal die; impellers are casted by investment casting means,in order to guarantee excellent performance of products. Numerical control machine and all kinds of machining equipment with high precision as well as advanced machining process and excellent management mode can ensure manufacturing of pumps with perfect Performance.
First Class Inspection Ability
We have more than 30 inspection devices such as pump test station with national Level I qualification certificates, advanced balancing machine, metal analyzer, vibration meter, noise meter,roughness meter, hardness meter, paint thickness tester, mechanical seal rotation test and air tightness test devices as well as more than 500 various measurement instruments such as difference gauge, plug gauge, ring gauge, micrometer, tilt meter with high precision to ensure reliable and efficient pumps.
Technical Ability
Dalian Kehuan Pumps co.,Ltd. has its own technical development team including specialists,engineers and technicians who have a deep research on various pumps.
We can provide all kinds of services related to pumps quickly such as pump R&D,reconstruction and. to surveying and drawing.
We design pumps and mechanical seal with the help of computer aided design software such as CAD and SolidWorks.
All of our products meet the following international standards such as API 610, D1N, ANSI, ISO.
We can design and optimize the pumps with our advanced technology in combination with customer's specific requirements
*If you have any questions about our products,I hope you can contact me at your convenience.
Thank you for your concern.
Audited Supplier 
){kind=link}